Roadware Products

Roadware 10 Minute Concrete Mender™ is a two-part polyurethane that penetrates deep into concrete to make permanent repairs. Nearly thin as water at less than 9cps, Concrete Mender™ actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender™ eliminates the bond line as it Microdowels into the concrete. We call it Microdowling™. 

Permanent repair in just 10 minutes. Concrete Mender™ cures quickly to a durable 4500psi polymer concrete that effectively transfers heavy loads throughout the repaired area, eliminating pop-outs. 

 Cures in just 10 minutes at 70°F (21°C) • Works in freezers below -20°F (-28°C) • May be polished • Never gets brittle • Easily applied • Contains no epoxy or polyurea • Easy to mix • Nonflammable • Low V.O.C’s • Paintable • Coatable • Sandable • Meets USDA guidelines • And more… 

 Self-mixing at point of application.
Use a standard 1:1 ratio 600ml cartridge application gun. See Cartridge Application Instructions. 

 Needle tip mixes are available.
For precise application. Choose from 14, 15 or 18 gauge. 

 Full-depth crack injection is possible without pumps or ports. The easy-to-use soft-tip injection mixers make this process efficient. 

 Bulk mix application for larger cracks and spalls is available in one-gallon containers in two-gallon kits. Simply add sand and mix by hand. Ten-gallon kits are also available. 

 To extend with sand, mix one gallon of Concrete Mender™ with 2 parts silica sand to create approximately 2.2 gallons of repair material. This yields twice the amount compared to epoxy or polyurea.   Please refer to our Product Estimator for more details. 

 Freezer Floors
Repair concrete at working freezer temperatures below -20°F (-28°C) 

 Grind, polish, and coat. 

Accepts polishing or most coating systems in about 10 minutes at 70°F (21°C)